Featured image credit: SpaceX
Lift Off Time
|March 24, 2021 – 08:28 UTC | 04:28 EDT|
|Starlink V1.0 L22 (Starlink RF Mission 5-1): the 23rd Starlink mission|
|Falcon 9 Block 5 B1060-6; 48 day turn around|
|Space Launch Complex 40 (SLC-40), Cape Canaveral Space Force Station, Florida, USA|
|15,600 kg (~34,000 lbs) (60 x 260 kg, plus dispenser)|
Where are the satellites going?
|Starlink Shell 1; 550 km circular Low-Earth Orbit (LEO), initial orbit: 53.06° 287 x 255 km|
Will they be attempting to recover the first stage?
Where will the first stage land?
|633 km downrange on Of Course I Still Love You|
Tug: Finn Falgout; Support: GO Quest
Will they be attempting to recover the fairings?
|The fairing halves will be recovered from the water ~707 km downrange by Shelia Bordelon|
Are these fairings new?
|No, the active half supported Starlink V1.0 L9 and the passive half previously supported Sentinel-6; 229 and 123 day turnaround time, respectively|
How’s the weather looking?
|The weather is currently 90% go for launch (As of March 23, 2021 12:00 UTC)|
This will be the:
|– 1st mission using Shelia Bordelon for fairing recovery|
– 2nd SpaceX launch on March 24 (FalconSAT-2 (Falcon 1 flight 1) launched in 2006)
– 112th Falcon 9 launch
– 54th Falcon 9 flight with a flight proven booster
– 58th re-flight of a booster
– 9th re-flight of a booster in 2021
– 78th booster landing
– 47th landing attempt on OCISLY
– 9th launch for SpaceX in 2021
– 5th 6th flight of a booster
– 67th SpaceX launch from SLC-40
– 25th orbital launch attempt of 2021
Stats powered by boostertracker.com
Where to watch
What’s this all mean?
SpaceX’s Starlink V1.0 L22 (Starlink 22) mission will launch 60 Starlink satellites atop its Falcon 9 rocket. The Falcon 9 will lift off from Space Launch Complex 40 (SLC-40), at Cape Canaveral Space Force Station, in Florida. Starlink 22 will mark the 22nd operational Starlink mission, boosting the total number of Starlink satellites launched to 1,385, of which ~1,260 will still be in orbit around the Earth as of launch.
In filings with the FCC this mission is also known as Starlink RF Mission 5-1. The RF stands for “radio frequency,” and suggests that the satellites are not equipped with inter-satellite laser communication links. It is not known what the “5-1” signifies.
What is Starlink?
Starlink is SpaceX’s internet communication satellite constellation. The Low-Earth orbit constellation will deliver fast, low-latency internet service to locations where ground-based internet is unreliable, unavailable, or expensive. The first phase of the constellation consists of 5 orbital shells.
Starlink is currently in the “Better Than Nothing Beta,” allowing anyone in approved regions to order or preorder. However, for now, only higher latitudes are fully covered, so people of lower latitudes are currently only able to pre-order Starlink. After 24 launches SpaceX will achieve global coverage, but the constellation will not be complete until ~42,000 satellites are in orbit. Given SpaceX’s current Starlink production and launch rate, Starlink will have global coverage, excluding the poles, by the middle of 2021.
Once Starlink is complete, the venture is expected to profit $30-50 billion annually. This profit will largely finance SpaceX’s ambitious Starship program, as well as Mars Base Alpha.
What is the Starlink Satellite?
Each Starlink V1.0 satellite has a compact design and a mass of 260 kg. SpaceX developed a flat-panel design, allowing them to fit as many satellites as possible into the Falcon 9’s 5.2 meter wide payload fairing. Due to this flat design, SpaceX is able to fit up to 60 Starlink satellites and the payload dispenser into the second stage, while still being able to recover the first stage. This is near the recoverable Falcon 9’s payload capacity to LEO, at around 17 tonnes.
For how small each Starlink satellite is, each one is packed with high-tech communication and cost-saving technology. Each Starlink satellite is equipped with 4 phased array antennas, for high bandwidth and low-latency communication, and two parabolic antennas. The satellites also include a star tracker, which provides the satellite with attitude data, ensuring precision in broadband communication.
The Starlink satellites are also equipped with an autonomous collision avoidance system, which utilizes the DOD’s debris tracking database to autonomously avoid collisions with other spacecraft and space junk.
Currently, the Starlink satellites being launched into polar orbit have a laser communication system on board. This system is currently in version 0.9, however SpaceX is expecting all new Starlink satellites to be equipped with it by next year.
To decrease costs, each satellite only has a single solar panel, which simplifies the manufacturing process. To further cut costs, Starlink’s propulsion system, an ion thruster, uses krypton as fuel, instead of xenon. While the specific impulse (ISP) of krypton is significantly lower than xenon’s, it is far cheaper, which further decreases the satellite’s manufacturing cost.
Each Starlink satellite is equipped with the first Hall-effect krypton powered ion thruster. This thruster is used both for ensuring the correct orbital position, but is also used for orbit raising and orbit lowering. At the end of the satellite’s life, this thruster is used to deorbit the satellite.
What is the Starlink Satellite Constellation?
A satellite constellation is a group of satellites that work in conjunction for a common purpose. Currently, SpaceX plans to form a network of 11,716 satellites; however, in 2019 SpaceX filed an application with the Federal Communication Commission (FCC) for permission to launch and operate an additional 30,000 satellites as part of phase 2 of Starlink. To put this number of satellites into perspective, this is roughly 20 times more satellites than were launched before 2019.
Of the initial ~12,000 satellites, ~4,400 would operate on the Ku and Ka bands, with the other ~7,600 operating on the V-Band.
Due to the vast number of Starlink satellites, many astronomers are concerned about their effect on the night sky. However, SpaceX is working with the astronomy community and implementing changes to the satellites to make them harder to see from the ground and less obtrusive to the night sky. SpaceX has changed how the satellites raise their orbits and, starting on Starlink V1.0 L9, added a sunshade to reduce light reflectivity. These changes have already significantly decreased the effect of Starlink on the night sky.
Phase 1 Orbital Shells:
|Inclination (°)||Orbital Altitude (km)||Number of Satellites|
The first orbital shell of Starlink satellites will consist of 1,584 satellites in a 53° 550 km low-Earth orbit. This is the shell that SpaceX is currently filling, and it is expected that this shell will be complete by June 2021. Once complete, the first shell will provide coverage between roughly 52° and -52° latitude (~80% of the Earth’s surface), and will not feature laser links until replacement satellites will launch after 2021.
The second currently approved orbital shell will consist of 1,600 satellites in a 53.8° 1,100 km low-Earth orbit. However, in April of 2020, SpaceX submitted a request to the FCC to change this shell from the aforementioned orbit to a 570 km 53.2° LEO with 1,440 satellites. This updated orbital configuration would slightly increase coverage area and would drastically increase the bandwidth of the constellation. After the first shell’s completion and once approval is granted for this change it is expected that SpaceX will fill this shell alongside with the 4th shell next.
The third shell of Starlink phase 1 that is currently approved will host 400 satellites in a 70° 1,325 km orbit. Included in the FCC request submitted in 2020, SpaceX wants to change this shell to host 720 satellites in a 70° 570 km orbit. These satellites would significantly increase the coverage area, which would make the Starlink constellation cover around 94% of the globe.
For the fourth shell, SpaceX currently is permitted to launch 374 satellites into a 74° 1,130 km orbit. However, SpaceX has also requested that this shell gets changed. Shell 4 has been moved to a 97.6° 560 km orbit that will contain 336 satellites. SpaceX deployed 10 laser link test satellites into this orbit on their Transporter-1 mission to test satellites in a polar orbit.
The final shell of phase 1 currently allots for 450 satellites in a 81° 1,275 km orbit. However, just like shells 2, 3, and 4 SpaceX has requested to move this shell to another 97.6° 560 km low-Earth polar orbit with 172 satellites. It is unclear why this shell covers the same orbital plane as shell 4.
Phase 2 Orbital Shells:
The sixth orbital shell of Starlink satellites is permitted to consist of 2,493 satellites in a 42° 335.9 km LEO. This large number of satellites would decrease latency and increase bandwidth for lower latitudes.
The seventh Starlink shell permits SpaceX to deploy 2,478 satellites into a 48° 340.8 km low-Earth orbit. These satellites will further decrease latency and increase bandwidth for lower latitudes.
The final shell of Starlink phase 2 allows SpaceX to deploy 2,547 satellites in a 53° 345.6 km orbit.
SpaceX has until March of 2024 to be half complete with phase 1, and phase 1 must be complete by March of 2027. Phase 2 must be half complete by November of 2024, and be finished by November of 2027. Failure to do so could result in SpaceX losing their dedicated frequency band.
What is Falcon 9 Block 5?
The Falcon 9 Block 5 is SpaceX’s partially reusable two-stage medium-lift launch vehicle. The vehicle consists of a reusable first stage, an expendable second stage, and, when in payload configuration, a pair of reusable fairing halves.
The Falcon 9 first stage contains 9 Merlin 1D+ sea level engines. Each engine uses an open gas generator cycle and runs on RP-1 and liquid oxygen (LOx). Each engine produces 845 kN of thrust at sea level, with an specific impulse (ISP) of 285 seconds, and 934 kN in a vacuum with an ISP of 313 seconds. Due to the powerful nature of the engine, and the large amount of them, the Falcon 9 first stage is able to lose an engine right off the pad, or up to two later in flight, and be able to successfully place the payload into orbit.
The Merlin engines are ignited by TEA-TEB. During static fire and launch the TEA-TEB is provided by the ground service equipment. However, as the Falcon 9 first stage is able to propulsively land three of the Merlin engines (E1, E5, and E9) contain TEA-TEB canisters to relight for the boost back, reentry, and landing burns.
The Falcon 9 second stage is the only expendable part of the Falcon 9. It contains a singular MVacD engine that produces 992 kN of thrust and an ISP of 348 seconds. The second stage is capable of doing several burns, allowing the Falcon 9 to put payloads in several different orbits.
For missions with many burns and/or long coasts between burns, the second stage is able to be equipped with a mission extension package. When the second stage has this package it has a grey strip, which helps keep the RP-1 warm, an increased number of COPVs for pressurization control, and additional TEA-TEB.
Falcon 9 Booster B1060
The booster supporting this mission is B1060, which has flown five times. As Starlink 22 marks the boosters 6th flight, it changes its designation to B1060-6.
|B1060 Flight History||Launch Date (UTC)||Turnaround Time (Days)|
|GPS III SV03||June 30, 2020||N/A|
|Starlink V1.0 L11||September 3, 2020||65|
|Starlink V1.0 L14||October 24, 2020||51|
|Turksat-5A||January 8, 2021||76|
|Starlink V1.0 L18||February 4, 2021||27|
Following stage separation, the Falcon 9 will conduct 2 burns. These burns will softly touch down the booster on Of Course I Still Love You.
Falcon 9 Fairings
The Falcon 9’s fairing consists of two dissimilar reusable halves. The first half (the half that faces away from the transport erector) is called the active half, and houses the pneumatics for the separation system. The other fairing half is called the passive half. As the name implies, this half plays a purely passive role in the fairing separation process, as it relies on the pneumatics from the active half.
Both fairing halves are equipped with cold gas thrusters and a parafoil which are used to softly touch down the fairing half in the ocean. SpaceX used to attempt to catch the fairing halves in nets on GO Ms. Tree and GO Ms. Chief. However, at the end of 2020 this program was cancelled due to safety risks and a low success rate. On Starlink 22, SpaceX will attempt to recover both the active and passive half from the water with their recovery vessel Shelia Bordelon.
SpaceX is currently flying two slightly different versions of the Falcon 9 fairing. The new “upgraded” version has vents only at the top of each fairing half, by the gap between the halves, whereas the old version had vents placed spread equidistantly around the base of the fairing. Moving the vents decreases the chance of water getting into the fairing, making the chance of a successful scoop significantly higher.
Fairings on this mission
On Starlink 22 the active half previously flew on the Starlink V1.0 L9 mission. Following Starlink 9, the fairing was recovered from the water by GO Ms. Tree. The passive half previous flew on the Sentinel-6 mission, and was recovered from the water by NRC Quest.
Flight history provided by Colin Fletcher
Starlink 22 Full Mission Profile
– 00:38:00 SpaceX Launch Director verifies go for propellant load.
– 00:35:00 RP-1 (rocket grade kerosene) loading underway.
– 00:35:00 1st stage LOx (liquid oxygen) loading underway
– 00:16:00 2nd stage LOx loading underway
– 00:07:00 Falcon 9 begins engine chill prior to launch
– 00:01:00 Command flight computer to begin final prelaunch checks
– 00:01:00 Propellant tank pressurization to flight pressure begins
– 00:00:45 SpaceX Launch Director verifies go for launch
– 00:00:03 Engine controller commands engine ignition sequence to start
– 00:00:00 Falcon 9 Liftoff
Launch, Landing, and Satellite Deployment*
00:01:12 Max Q (moment of peak mechanical stress on the rocket)
00:02:33 1st stage main engine cutoff (MECO)
00:02:36 1st and 2nd stages separate
00:02:44 2nd stage engine starts (SES-1)
00:03:09 Fairing deployment
00:06:40 1st stage entry burn complete
00:08:24 1st stage landing
00:08:47 2nd stage engine cutoff (SECO-1)
00:44:55 2nd stage engine starts (SES-2)
00:44:56 2nd stage engine cutoff (SECO-2)
01:03:52 Starlink 22 payload deploy
* All times are approximate
In the table, it says Shell 2 is 1,140 satellites, but in the description, it says 1,440. Obviously one is a typo. I think 1,440 is correct, as it matches what I see on Wikipedia. It also reminds me of a 3.5″ floppy, which is nice, and probably not entirely coincidental (the shell is likely designed with multiples much like the tracks and sectors on the disk, so similar numbers don’t surprise me).
A turnaround time of 27 days! That beats the previous record of 38 days set in January. I’m shocked that I’m not seeing stories highlighting that.